HomeProducts > One-component Polyurethane Sealant

One-component Polyurethane Sealant with Low Weight Change Ratio

One-component polyurethane sealant is a kind of sealant that is one-component and cures at room temperature. The paste state makes it be squeezed out to operation. One-component polyurethane sealant cures by absorbing the moisture in the air. And it reacts with active group in the surface to play the adhesion role. It is not saggy, so it will not flow when used in vertical joints. It can adhere on metal, rubber, wood, cement, ceramic and glass. It has two functions: sealing and waterproofing. And one-component polyurethane sealant can be divided into two kinds according to the reaction encountering water: water-swelling sealant and no swelling sealant.

There are two bottles one-component polyurethane sealant a caulking gun.
one-component polyurethane sealant is easy to use.
Four aluminum foils one-component polyurethane sealant and a carton on the floor.
Delayed coagulation one-component polyurethane water-swelling sealant cures slowly, making the sealing effect better.
Five aluminum foils one-component polyurethane sealant on the floor.
Aluminum foil package makes one-component polyurethane sealant easier to use.
Two aluminum foils one-component polyurethane sealant lean against two cartons.
Aluminum foils one-component polyurethane sealant are placed in cartons, making the transportation easier.

Features:

  • One component, easy to use and can construct with a standard caulking gun.
  • Excellent waterproof ability.
  • Good aging resistance. Its weight change ratio is very low. And there are urethane linking chains in its structure. So the expansion units will not lose during using. Its using life can exceed 100 years at room temperature.
  • High bonding strength and outstanding sealing capability. It can bond on the concrete surface firmly whether the surface is damp, smooth or tough. What's more, it has good adhesion capability with metal, rubber, wood, cement parts, ceramic, glass and so on.
  • No sagging. Used in sealing vertical and the top joints not flowing.
  • Environmentally friendly. It is resistant to many chemicals, such as hydrochloric acid, salt water, sodium carbonate and potassium hydroxide. It can contact with drinking water. It is safe and nontoxic.
  • Good wear-resisting performance and excellent resistance to oil.
  • Good elasticity.

Package:

  • 310ml per aluminum cartridge, 20pcs per box, 2 boxes per carton.
  • 400ml/600ml per aluminum foil package, 20pcs per box, 2 boxes per carton.
  • 250kg/drum.
  • Packed as customers' requirements.

Shelf life: 12 months in original unopened package, stored in dry and cool environment, and keep the temperature between +5°C to +25°C.

Color: black, white, gray or customized.

One-component polyurethane sealant technical data:
No. Items Measured index
1 Density (g/cm3) 1.3±0.05
2 Curing speed (mm/d) 3.5
3 Hardness (Shore A) 30±5
4 Elongation at break (%) >400
5 Tensile strength (MPa) 2.5
6 Touch dry time (min) 30

Our products are all tested before the delivery.

Two aluminum foils one-component polyurethane sealant and a carton on the floor.
Aluminum-foil package one-component polyurethane water-swelling sealant is put in cartons, which is easier to transport.
A aluminum foil one-component polyurethane water-swelling sealant is put on a electric scale.
One-component polyurethane sealant must be weighed to confirm that it is up to specified weight.
A aluminum foil one-component polyurethane water-swelling sealant and a yellow tape ruler on the floor.
One-component polyurethane sealant must be up to specified length before sell.
A aluminum foil one-component polyurethane water-swelling sealant is being tested the diameter by a vernier caliper.
One-component polyurethane sealant must be up to specified diameter before sell.

Using method:

  1. Clean the dust of the construction surface. It has no special requirements about whether the surface is smooth and dry.
  2. Put the sealant into caulking gun, cut off the tip, screw on nozzle and cut the nozzle to desired size.
  3. Squeeze the sealant into construction joints with the caulking gun.
  4. Avoid to contact with water before the sealant cures.

Application:
It is widely used in construction and transportation:

  • Used in buildings: filling and sealing joints of doors, windows and glass.
  • Used in construction: sealing the joints of expressway, bridge, airport runway and so on.
  • Used in automobile: installation and sealing of glass mainly the windshield.
A man wearing red clothes is cleaning the concrete surface with a small handcart.
Cleaning is necessary before using the sealant, and it makes the adhesion effect better.
One-component polyurethane sealant is squeezing in the concrete joint with a caulking gun.
One-component polyurethane sealant can seal the joint and makes it waterproof.
A person is sealing the joint between wall and window.
One-component polyurethane sealant can be used in the window joint sealing, making the window sealed.
Several rebars making a circle are glued on concrete ground.
One-component polyurethane sealant makes the rebars fixed on the concrete ground firmly.
Some workers are constructing on a section of expressway.
One-component polyurethane sealant can be used in expressway, making the expressway has long service life.
A big bridge is under construction.
One-component polyurethane sealant can be used in bridge, making the bridge secure and solid.

Inquiry for Our Product

Hebei Ruida Engineering Rubber and Plastics Co., Ltd.
E-mail: sales@polyurethane-sealant.com

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.

Full Name *
Country Code * + Phone Number *
Your Website
Message *